MORE INFORMATION
Characteristics the slats- Assembled: simply stack the slats inside the posts (grooved). Aluminum finishing profiles will give your fence an optimal finish. You can build a fence up to 1.80m high.
- Composition: resinous wood and recycled polymer
- Dilation: provide a 10mm expansion joint at the ends of the slats
- profile: hollow section 22 x 160 mm
- color: teak brown, anthracite gray and stone gray
- maintenance: regular cleaning with a water jet and sweeping, without insisting, in the direction of the slats, are enough to eliminate most of the marks
The posts:- material: aluminum with QUALICOAT quality finish (10 year guarantee)
- diameter: 90mm
- color: anthracite gray, lead gray and earth brown
- assembly: simple slotted slats
- Mounting: with pole feet on a wall or concrete base for a maximum pole height of 0.99 m / recessed for heights greater than 0.99 m
Possible configurations: For a 1.00 m high module it is necessary:
-6 slats-2 posts of 1.02m-2 feet of post or plate-2 caps-2 finishing profiles-2 intermediate profiles (decorative and reinforcement)
For a 1.80 m high module, embedded installation with concrete in the ground, it is necessary:
-11 slats-2 2.50m posts-2 feet of post or plate-2 caps-2 finishing profiles-3 intermediate profiles (decorative and reinforcement)
For a 1.80 m high module, laid on plates anchored to the terrazzo, it is necessary:
-11 slats-2 1.83 m posts-2 feet of post or plate-2 caps-2 finishing profiles-3 intermediate profiles (decorative and reinforcement)