AquaCheck swimming pool salt water analytical strips

Analytical strips of salt in swimming pool water

The strips measure salt levels between 400 and 7000 ppm, and only take three to four minutes with a small sample of water. With the proper levels, you can rest easy knowing that your pool generator produces the correct amount of chlorine to keep your water clean and free of contaminants.

User manual:

• Fill a small jar with approximately 2.5 cm of water from your spa or pool
• Insert the lower end of the strip in the water that you have put in the bottle, for the results to be reliable and exact you must keep half of the tape completely dry
• In approximately 3 to 4 minutes, when the yellow band turns black, remove the tape from the sample and determine where the highest white point (white peak) appears on the numerical scale of the test tape and compare that value with the table in the jar